Designing coatings to have low adhesion surfaces through self-stratification

发布日期:2019-07-17 15:09|浏览量:   来源:  


题目:Designing coatings to have low adhesion surfaces through self-stratification

主讲嘉宾:Dean C. Webster 教授 North Dakota State University





摘要:Designing coatings to have important functions is an ever-increasing area of coatings science. Many applications of coatings require systems that have surfaces tailored to deter adhesion to their surfaces. Using the concept of self-stratification, it is possible to decouple the surface and bulk properties of coatings so that the bulk and surface properties can be tuned individually to meet the material requirements. The approach of self-stratification has been applied to the design of mechanically robust marine fouling-release coatings. By combining functional PDMS with a polyurethane system, coatings having the bulk properties of polyurethanes as well as low surface energy can be designed that have good fouling-release performance for a wide variety of marine organisms. However, there are some marine organisms that are able to adhere well to a low surface energy surface such as PDMS. An amphiphilic variation on the SiPU coating system was investigated that created amphiphilic coating surfaces through combining hydrophobic siloxane and hydrophilic PEG components into the coating. Laboratory fouling-release studies showed systematic trends in bio-adhesion as a function of coating composition. This same set of coatings was subjected to ice adhesion measurements and a number of the coatings had very low ice adhesion values. Remarkably, the trends in ice adhesion as a function of coating composition paralleled the trends in barnacle adhesion, indicating that the underlying coating design concepts for marine coatings and ice phobic coatings are similar.



XML 地图 | Sitemap 地图